Flangetilslutning PN 16. Pneumatisk fjederlukke
Generel data
| Type: | 2000AR |
| Materiale: | Støbejern, stål og syrefast rustfri stål |
| Trykklasse: | PN 16 og PN40 afhængig af materialer |
| Overdel: | Stål, nikkelplated |
| Sæde: | Syrefast rustfri stål |
| Kegle/reg.skørt: | Syrefast rustfri stål |
| Spindel: | Syrefast rustfri stål |
| Spindelpakning: | Standard RPTFE (15% Grafit) ≤200ºC |
| Aktuator: | Stål med konsol i duktilt støbejern, coated |
| Lufttilslutning: | 1/8" BSP |
| Styretryk: | 3-15psi, 6-18psi eller 6-30psi. Max 2,5 bar |
| Indbygningsmål: | EN558-1 serie1 |
| Tilslutning: | EN1092 |
| Temperatur: | -5° til 200°C (standard) |
| Varianter: | Spindelforlænger (kølestykke) for temperatur ≥200°C |
| Spindelforlænger for temperaturer ≤ -5°C | |
| Reduceret trim | |
| Bælgtættende | |
| Spindelpakning i Grafit for højere temperaturer (200-400°C) i kombination med kølestykke | |
| Stellite sæde og kegle | |
| Analoge og digitale positionere med og uden feedback | |
| Åben/Lukke sensorer | |
| Manuelt nødhåndhjul | |
| Luftfilterregulator | |
| Fjeder åbne |
| DIMENSIONER (mm) | TILSLUTNINGER (mm) | ||||
|---|---|---|---|---|---|
| Varenr. | DN (Kvs*) | L | H | Flangediam. | Boltcirkel |
| - | 15 (3,4) | 130 | 49 | 95 | 65 x 4 x 14 |
| - | 20 (6,6) | 150 | 58 | 105 | 75 x 4 x 14 |
| - | 25 (10,8) | 160 | 68 | 115 | 85 x 4 x 14 |
| - | 32 (17,0) | 180 | 70 | 140 | 100 x 4 x 18 |
| - | 40 (20,5) | 200 | 82 | 150 | 110 x 4 x 18 |
| - | 50 (43,0) | 230 | 86 | 165 | 125 x 4 x 18 |
| - | 65 (60,5) | 290 | 111 | 185 | 145 x 4 x 18 |
| - | 80 (75,2) | 310 | 135 | 200 | 160 x 8 x 18 |
| - | 100 (102,1) | 350 | 160 | 220 | 180 x 8 x 18 |
| DIMENSIONER (mm) | TILSLUTNINGER (mm) | ||||
|---|---|---|---|---|---|
| Varenr. | DN (Kvs*) | L | H | Flangediam. | Boltcirkel |
| - | 15 (3,4) | 130 | 49 | 95 | 65 x 4 x 14 |
| - | 20 (6,6) | 150 | 58 | 105 | 75 x 4 x 14 |
| - | 25 (10,8) | 160 | 68 | 115 | 85 x 4 x 14 |
| - | 32 (17,0) | 180 | 70 | 140 | 100 x 4 x 18 |
| - | 40 (20,5) | 200 | 82 | 150 | 110 x 4 x 18 |
| - | 50 (43,0) | 230 | 86 | 165 | 125 x 4 x 18 |
| - | 65 (60,5) | 290 | 111 | 185 | 145 x 8 x 18 |
| - | 80 (75,2) | 310 | 135 | 200 | 160 x 8 x 18 |
| - | 100 (102,1) | 350 | 160 | 220 | 190 x 8 x 22 |
| DIMENSIONER (mm) | TILSLUTNINGER (mm) | ||||
|---|---|---|---|---|---|
| Varenr. | DN (Kvs*) | L | H | Flangediam. | Boltcirkel |
| - | 15 (3,4) | 130 | 49 | 95 | 65 x 4 x 14 |
| - | 20 (6,6) | 150 | 58 | 105 | 75 x 4 x 14 |
| - | 25 (10,8) | 160 | 68 | 115 | 85 x 4 x 14 |
| - | 32 (17,0) | 180 | 70 | 140 | 100 x 4 x 18 |
| - | 40 (20,5) | 200 | 82 | 150 | 110 x 4 x 18 |
| - | 50 (43,0) | 230 | 86 | 165 | 125 x 4 x 18 |
| - | 65 (60,5) | 290 | 111 | 185 | 145 x 8 x 18 |
| - | 80 (75,2) | 310 | 135 | 200 | 160 x 8 x 18 |
| - | 100 (102,1) | 350 | 160 | 220 | 190 x 8 x 22 |
| DIMENSIONER | ||||
|---|---|---|---|---|
| Varenr. | Aktuatortype | øDa (mm) | H1 (mm) | |
| - | T200 | 210 | 217 (DN15-32) | |
| - | T250 | 292 | 217 (DN15-32) | |
| - | T250 | 292 | 230 (DN40-50) | |
| - | T310 | 336 | 242 (DN25-32) | |
| - | T310 | 336 | 255 (DN40-80) | |
| - | T310 | 336 | 299 (DN100) | |
| - | T400 | 408 | 266 (DN32) | |
| - | T400 | 408 | 279 (DN40-80) | |
| - | T400 | 408 | 323 (DN100) | |
| - | T500 | 520 | 266 (DN32) | |
| - | T500 | 520 | 279 (DN40-80) | |
| - | T500 | 520 | 323 (DN100) | |
| Type | Fjederlukke (SC) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | T200 | T200 | T200 | T250 | T250 | T250 | T310 | T310 | T310 | ||||
| Styrelufttryk | 3-15psi | 6-18psi | 6-30psi | 3-15psi | 6-18psi | 6-30psi | 3-15psi | 6-18psi | 6-30psi | ||||
| DN 15 | 12 | 25 | 65 | 27 | 55 | 110 | - | - | - | ||||
| DN 20 | 8 | 16 | 40 | 17 | 34 | 68 | - | - | - | ||||
| DN 25 | 5 | 9 | 22 | 9 | 19 | 38 | 15,5 | 31 | 62 | ||||
| DN 32 | 3 | 6 | 11 | 6 | 12 | 20 | 10 | 20 | 30 | ||||
| DN 40 | - | - | - | 4 | 8 | 14,5 | 7 | 14 | 21 | ||||
| DN 50 | - | - | - | 2,4 | 3 | 7 | 3,5 | 7 | 12 | ||||
| DN 65 | - | - | - | - | - | - | 2,5 | 4,2 | 6,5 | ||||
| DN 80 | - | - | - | - | - | - | 1,7 | 2,8 | 4,7 | ||||
| DN 100 | - | - | - | - | - | - | 0,9 | 1,3 | 2,6 | ||||
| Type | Fjederlukke (SC) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | T400 | T400 | T400 | T500 | T500 | T500 | |||||
| Styrelufttryk | 3-15psi | 6-18psi | 6-30psi | 3-15psi | 6-18psi | 6-30psi | |||||
| DN 15 | - | - | - | - | - | - | |||||
| DN 20 | - | - | - | - | - | - | |||||
| DN 25 | - | - | - | - | - | - | |||||
| DN 32 | 14,5 | 29,5 | 45 | 24,5 | 49 | 75 | |||||
| DN 40 | 10,5 | 20,5 | 31,5 | 17,5 | 34,5 | 52,5 | |||||
| DN 50 | 5 | 12 | 18 | 9,5 | 19,5 | 30,3 | |||||
| DN 65 | 3,8 | 6,7 | 16 | 5,5 | 12,2 | 26 | |||||
| DN 80 | 2,5 | 4 | 11 | 4,2 | 7 | 16 | |||||
| DN 100 | 1,4 | 2,8 | 6,3 | 2,4 | 4,9 | 10,5 | |||||
*Kvs: m3/t for vand ved 1 bars trykfald. Opgivne værdier er for EQP/EQV kegler med logaritmisk karakteristik.
Vi har egenproduktion af reguleringsventiler med flangetilslutning, som kan leveres med både lineær og logaritmisk karakteristik, og med pneumatisk eller elektrisk reguleringsdrev.
Leveringsprogrammet suppleres med reguleringsventiler fra udvalgte producenter, så vi kan dække reguleringsventiler til høje tryk og temperaturer samt i speciel legeringer for aggressive medier.
Du kan læse meget mere om de forskellige 2-Vejs sædeventiler/kegleventiler med flanger herunder.