5 part piston seal
Description
KDSA is a compact piston seal that is designed with a central NBR topic and two back up rings in TPE and 2 guide rings POM.
Back up rings prevent extrusion of NBR seal and guide rings the piston centered in the cylinder
Material:
Sealing part: NBR shore A +/- 3
Back up rings: Thermoplastic elastomer (TPE)
Guide Rings: Polyoxymethylene (POM)
Technical data
Press: 0-300bar with peak up to 400bar at 60 ° C
Speed: <0.5 m / s
Temperature: -30 ° C to + 100 ° C
Montage:
The installation of this seal may be in either a closed track (monoblock seal) or an open track (2 shared stamp).
The installation is made in the following order:
- Rubber seal member
- Page support rings
- External support rings
It is important that the piston does not have burrs or other sharp edges which might damage the seal during installation.
DH9 | dh9 | E+0,2 | d1h9 | d2±0,2 | E1 0/+0,1 | R | C |
---|---|---|---|---|---|---|---|
32,0 | 24,0 | 15,5 | 28,0 | 31,4 | 3,2 | 0,4 | 3,5 |
40,0 | 32,0 | 15,5 | 36,0 | 39,4 | 3,2 | 0,4 | 4,0 |
50,0 | 38,0 | 22,5 | 46,0 | 49,4 | 4,2 | 0,4 | 4,0 |
60,0 | 48,0 | 22,5 | 56,0 | 59,4 | 4,2 | 0,4 | 4,5 |
63,0 | 51,0 | 22,5 | 59,0 | 62,4 | 4,2 | 0,4 | 4,5 |
70,0 | 58,0 | 22,5 | 66,0 | 69,4 | 4,2 | 0,4 | 4,5 |
80,0 | 66,0 | 22,5 | 76,0 | 79,4 | 5,2 | 0,4 | 4,5 |
90,0 | 76,0 | 22,5 | 86,0 | 89,4 | 5,2 | 0,4 | 4,5 |
100,0 | 86,0 | 22,5 | 96,0 | 99,4 | 5,2 | 0,4 | 5,0 |
110,0 | 96,0 | 22,5 | 106,0 | 109,4 | 5,2 | 0,4 | 5,0 |
120,0 | 106,0 | 22,5 | 116,0 | 119,4 | 5,2 | 0,8 | 5,0 |
125,0 | 108,0 | 26,5 | 121,0 | 124,4 | 7,2 | 0,8 | 5,0 |
130,0 | 113,0 | 26,5 | 126,0 | 129,4 | 7,2 | 0,8 | 5,0 |
140,0 | 123,0 | 26,5 | 136,0 | 139,4 | 7,2 | 0,8 | 5,0 |
150,0 | 133,0 | 26,5 | 146,0 | 149,4 | 7,2 | 0,8 | 5,0 |
160,0 | 143,0 | 26,5 | 156,0 | 159,4 | 7,2 | 0,8 | 5,0 |